Tech Svcs - Quality Control Technician
Job Title Tech Svcs - Quality Control Technician
Location: Orlando, FL, 32806, USA
Description Job Description
Quality Control Technicians inspect and maintain the most technologically advanced ride systems in the world. Problem solving, superior technical skills, and attention to detail are just some of the key attributes we are looking for in ourQuality Control Technicians.
Quality Control Technicians at Universal Orlando are responsible for:
+ Inspecting ride and show related material goods to assure product quality, accuracy and quality of workmanship, and conformity to material specifications.This includes both final products and in-process items. Also includes inspection of weld setups and preparation along with welding using visual, magnetic particle, and liquid penetrant methods; inspection of received parts and components for dimensional accuracy; material conformity to specifications; and inspection of fiberglass/composite assemblies, both in-process and for final acceptance. Non-destructive testing (inspection method) of structural and mechanical ride and facility equipment.
+ Performing process control verification audits of internal fabrication work groups, and at outside vendor locations.
+ Providing audit inspections of rides, showing action equipment, and facilities to ensure that the preventive maintenance tasks are being performed properly and completed.
+ Providing written reports of all inspections.
+ Researching at Document Control, with Vendors, and Internet Sites for information and data relevant to inspection of goods under scrutiny.
+ Facilitating corrective action; providing input to Engineering, as necessary, in formulating plans for corrective action. Providing feedback to Engineering facilitating the ECN process for product improvement or cost effectiveness.
+ Understanding and actively participating in Environmental, Health & Safety responsibilities by following established Universal Orlando policy, procedures, training and Team Member involvement activities.
+ Performing other duties as assigned.
To perform the role of a Quality Control Technician successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
+ High school degree or GED is required.
+ Technical school is preferred.
+ Associate’s degree (AA) in quality or related field is preferred.
+ Required - 1 Year: Experience with major Ride and Show attractions and performing inspections of structural (including bolting), mechanical, hydraulic and pneumatic equipment elements essential to those attractions.
+ 1 Year: Experience in performing NDT Inspection of equipment using Visual Inspection (VT), Magnetic Particle Inspection (MT) and Liquid Penetrant Inspections (PT).
+ Preferred -1 Year: Experience working with machine and weld shop fabrication and Q/C inspection for compliance with mechanical drawings.
+ 1 Year: Auditing experience of quality systems; or equivalent combination of education and experience.
+ Level II certification in Magnetic Particle Test (MT) through American Society for Non- Destructive Testing (ASNT) – required; Level II certification in Liquid Penetrant Inspection (PT) through American Society for Non- Destructive Testing (ASNT) – required; Level II certification in Visual Inspection (VT) through American Society for Non-Destructive Testing (ASNT) – required; Certified Welding Inspector (CWI) through American Welding Society (AWS) – preferred.
The physical demands described below are representative of those that must be met by an individual to successfully perform the essential functions of the Quality Control Technician job.
While performing the duties of this job, the individual is required to:
+ Regularly (2/3 of the time or more) talk; use hands and fingers to grip, pinch, handle or feel objects, tools or controls; work at heights for prolonged periods of time including heights with or without railings or over open pits greater than 4 feet; use close vision with or without corrective lens(clear vision at 20 inches or less); use distance vision with or without corrective lens(clear vision at 20 feet or more); use color vision(ability to identify and distinguish colors); use peripheral vision(ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point); use depth perception (vision, ability to judge distances and spatial relationships); adjust focus (ability to adjust the eye to bring an object into sharp focus while in changing light conditions e.g., sunshine to indoor or dark conditions); work in varied light conditions including low or diminished lighting; maintain alertness and attentiveness up to 4 hours while working varying hours; maintain concentration/focus (e.g., ability to interpret the work environment and make decisions on predetermined operating policies and procedure).
+ Frequently (1/3 to 2/3 of the time) stand for prolonged periods; hear audible alarms, voice commands with background noise; climb stairs/ladders; stoop, kneel, crouch or crawl; work in small or tight spaces.
+ Occasionally (1/3 of the time or less) walk for prolonged periods (including ability to walk at a given pace that is predetermined by a moving sidewalk); sit for prolonged periods; reach, pull, push with hands and arms above/below head; repeat motions more than twice per minute; work in an environment subject to vibrations; repetition-using an input device-a keyboard or mouse-in a steady manner; lift up to 50 pounds with control; push up to 100 pounds with control; work in an environment with flashing lights including strobe lamps; work in confined spaces i.e. manholes or work pits.
The work environment characteristics described below are representative of those an individual encounters while performing the essential functions of the Quality Control Technician job.
While performing the duties of this job, the individual is required to:
+ Regularly (2/3 of the time or more) work in wet, humid conditions (non-weather); work with aerosols (spray paints, brake cleaner); be exposed to lasers, radiation equipment, and or electromagnetic forces; use a valid Florida state driver’s license.
+ Frequently (1/3 to 2/3 of the time) work in outdoor weather conditions to include direct sunlight, heat or cold; work in extreme heat (non-weather); use a highreach (aerial lift); weld, cut, braze, or work with open flame; work with toxic or caustic chemicals, hazardous chemicals, fluorescent lamps or batteries; work with paint/solvents; use a motorized company vehicle or a leased or personal vehicle for company business; work on water attractions or yachts; be exposed to loud noise levels (noise when raised conversation is needed).
+ Occasionally (1/3 of the time or less) work in extreme cold (non-weather); work with cranes; use a forklift (sit down); erect or work on scaffolding; work fumes or airborne particles requiring the use of a respirator; work with compressed gas cylinders or tanks; work with oils/fuels.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The NBC Owned Television Stations create and distribute engaging content that connects with a valuable audience in 10 major markets across the country. Our content platforms include: NBC Stations broadcast and COZI TV, station websites, digital out-of home, and mobile. Through our local news operations, our lifestyle production arm LX.TV, and our local sales marketing and production teams, NBC creates content that connects communities with the people, events, and issues they care about most.